Nokia N95

Micky · #31 07-12-2008, 10:30 AM

No, it won't void your warranty.

danielsmith89 · #32 07-12-2008, 10:30 AM

OK, thanks for letting me know, im off to buy myself a Torx screwdriver now then :)

Micky · #33 07-12-2008, 10:32 AM

Make sure you buy a good quality Torx screwdriver, you don't want to round off your screws now do you?

danielsmith89 · #34 07-12-2008, 10:34 AM

I live in the UK and was thinking of this one from Maplin: http://www.maplin.co.uk/Search.aspx?...ver#checkstore if this is no good, could you link me to somewhere in the UK that does good ones?

EDIT: or possibly this one: http://www.maplin.co.uk/module.aspx?...99691&doy=12m7

Micky · #35 07-12-2008, 10:40 AM

That should be just fine :)

ajayE92 · #36 07-15-2008, 08:09 PM

i want to do this very badly but im scared too.. i may do this thursday morning

dbenyakar · #37 07-17-2008, 12:44 PM

Just fixed my N95-2 as shown in the instructions. Feels great now.
I didn't have to take the cover completely. I just exposed the 3 screws, applied the electrical PVC type and thats it.
The screws though were philips type and not torx type.

Now I want to fix the front keypad (the one underneath the screen, with the call On/Off) that makes crack noises as well.

Micky · #38 07-17-2008, 01:10 PM

Quote:

Originally Posted by dbenyakar

Now I want to fix the front keypad (the one underneath the screen, with the call On/Off) that makes crack noises as well.

Very easy to do.

Remove the 4 x screws holding the front cover on using the correct screwdriver.

Using a nylon opening tool, prise the side clips open, and the front will pull off, make sure you hold the lcd in place however, as this is lightly bonded to the front cover. One cover is off, the key pad will pop out using the nylon opening tool.

dbenyakar · #39 07-22-2008, 05:29 AM

Quote:

Originally Posted by GSi-R

Very easy to do.

Remove the 4 x screws holding the front cover on using the correct screwdriver.

Using a nylon opening tool, prise the side clips open, and the front will pull off, make sure you hold the lcd in place however, as this is lightly bonded to the front cover. One cover is off, the key pad will pop out using the nylon opening tool.

What is nylon opening tool? Is it a special tool that Nokia sells?

Hayabusa · #40 07-30-2008, 06:57 PM

Just done the slider fix to my 8gb and it worked!