Nokia N95

firebirdrc · #11 06-25-2007, 08:09 AM

Is your expert shield totaly fitted?

mine has gaps from top & bottom and also from the sides.

marlbororman · #12 06-26-2007, 09:57 PM

Fitted like a dream on all sides... i made extra sure screen was spotless before fitting, and gave a very firm rub over with the cloth that came with it.

You have to look really closely to even see its there!!!

salada2k · #13 06-26-2007, 10:44 PM

Quote:

Originally Posted by firebirdrc

Is your expert shield totaly fitted?

mine has gaps from top & bottom and also from the sides.

Same with mine, I was slightly disappointed with that. I think it's about 0.5mm gap on all sides except the bottom, which has about 1mm gap, depending on how you position it of course.

Taz · #14 06-26-2007, 11:13 PM

I got a n95 crystal case, n95 Screen Guard, n80 Screen Guard inc postage for £6 off the guy on Ebay I normally buy that sort of stuff from.

Screen protector just branded "Screen Guard" but went on very easily, seems to repel the thumb prints very well.

Crystal Case is just for when on holidays and the phone might get bashed around a bit.

firebirdrc · #15 06-27-2007, 08:59 AM

Quote:

Originally Posted by marlbororman

Fitted like a dream on all sides... i made extra sure screen was spotless before fitting, and gave a very firm rub over with the cloth that came with it.

You have to look really closely to even see its there!!!

Marlboroman can you picture it? i want to see if you no gaps at all. Are you sure it is expert shield?

salada2k · #16 06-27-2007, 11:17 AM

Quote:

Originally Posted by firebirdrc

Marlboroman can you picture it? i want to see if you no gaps at all. Are you sure it is expert shield?

I would like to see that as well!, Firebird RC, does yours sound like the way I described mine, with a small gap?

TMAC01 · #17 06-27-2007, 02:43 PM

Mine has tiny gaps on all sides as well, but as long as it covers the 320X240 pixels that actually matter (which it does), I am happy.

spyda · #18 06-27-2007, 04:14 PM

Mine is on one N95 and needs transferring to another. I had a hell of a job trying to get it off and in the end gave up (phone not returned yet) but when re-applying before even taking completely off it's gone back on with bubbles and creases all over!

So, let me get this right ... if I take off the screen protector and run it under the tap, it will be ok to re-apply and be good as new?

What are you using as the solution to re-apply it as mine has all evaporated from the original bottle.

I have to say also, I found it very difficult to fit in the first place; with the solution applied, the protector was supposed to slide freely into place according to the instructions ... no such luck!

So, either I am doing something wrong or ... I am doing something wrong!?

Any thoughts?

smaui · #19 06-27-2007, 04:18 PM

Quote:

Originally Posted by TMAC01

Mine has tiny gaps on all sides as well...

Same here

and it's less "invisible" than I expected. Also there's this small annoying air bubble which I just can't brush out for some reason. But oh well at least my screen has some protection now :)

salada2k · #20 06-27-2007, 04:27 PM

WOAH WOAH everyone woah. This thread is about EXPERT shield, not INVISIBLE shield.

Two totally different products. Smaui and Spyda, you guys are talking about the Invisible shield, no?

Marlborough man, TMAC01, firebirdrc and myself, are talking about the Expertshield.

The key differences are the Expertshield does not have an adhesive on it, it magically sticks on to your screen and actually has a micro layer of air inbetween, allowing it to super-invisible, beacuse it makes no actual 'contact'.

The one that comes with the spray on solution, the InvisibleShield, which I ordered for a friends camera, is different, and although the ad on their websites touts it as great, I think the Expertshield is much better, for the fact it has no adhesive and seems to be much clearer after application. The InvisibleShield is messy, uses an adhesive, needs liquid sprayed on it first, and after application, looks inferior. I'm not a big fan.

Spyder, it should slide around on the screen - you have to cake it in that spray (and your fingers as well, which stops fingerprints from getting on it when you touch it), it then slides for about 20 seconds until it starts to 'bond', allowing you to position it very accurately. Which, is the only plus about the InvisibleShield in my eyes. All I can suggest is apply more spray to your shield before applying it on the phone - literally make that sucker swim in the stuff first. Hope that helps :-)